当前位置:首页>>产品中心>>气动阀门
联系我们contact us
咨询热线0510-87898996

中国·上通阀门有限公司

上通控股集团

手机、微信:13812200508

手机、微信:13812230524

邮箱: 729268481@qq.com

电话:0510-87898996

传真:0510-87830505

①客服QQ: 729268481

②客服QQ: 2025189935

技术服务:0510-87836168

防伪查询、投诉:4008-888-666

地址:江苏省宜兴市高塍镇环保城10幢22-30号(展厅)

气动阀门
分享至:

气动法兰蝶阀

名称:气动法兰蝶阀

Name: pneumatic flanged butterfly valve

型号:D641X-10

Model: D641X-10

气动橡胶密封蝶阀是由气动执行器和软密封法兰蝶阀组成,安装对应的阀门附件可以用来切断和调节的场合使用,例如:配电磁阀换向阀、限位开关等用在开关和切断的场合,配阀门定位器,给出模拟量控制信号4-20mA,可以控制阀门开度大小,来实现调节管道压力、流量、温度的大小。

气动橡胶密封蝶阀结构简单、体积小、重量轻,只由少数几个零件组成。而且只需旋转90°即可快速启闭,操作简单,同时该电动阀门具有良好的流体控制特性。蝶阀处于完全开启位置时,蝶板厚度是介质流经阀体时少有的阻力,因此通过该阀门所产生的压力降很小,故具有较好的流量控制特性。气动橡胶密封蝶阀适用于适用于温度≤80~150℃如食品、化工、石油、电力、轻纺、造纸等给排水、气体管道上作调节流量和截流介质的作用。

Pneumatic rubber sealing butterfly valve is a pneumatic actuator and soft sealing flange butterfly valve, the valve can be used to install the corresponding accessories, cut off and adjust the situations such as the distribution of magnetic valve valve, limit switch is used in the switch and cut off the occasion, with the valve positioner, gives the analog control signal 4-20mA. You can control the size of the valve opening, to adjust pipe pressure, flow and temperature in size.

气动橡胶密封蝶阀结构简单、体积小、重量轻,只由少数几个零件组成。而且只需旋转90°即可快速启闭,操作简单,同时该电动阀门具有良好的流体控制特性。蝶阀处于完全开启位置时,蝶板厚度是介质流经阀体时少有的阻力,因此通过该阀门所产生的压力降 很小,故具有较好的流量控制特性。气动橡胶密封蝶阀适用于适用于温度≤80~150℃如食品、化工、石油、电力、轻纺、造纸等给排水、气体管道上作调节流量和截流介质的作用。

The pneumatic rubber seal butterfly valve is simple in structure, small in size and light in weight, and consists of only a few parts. The electric valve can be opened and closed quickly with only 90 degrees of rotation, and the valve has good fluid control characteristics. When the butterfly valve is fully open, the thickness of the butterfly plate is the only resistance of the medium flowing through the valve body, so the pressure drop produced by the valve is very small, so it has better flow control characteristics. Pneumatic rubber seal butterfly valve applies to temperature is less than or equal to 80 to 150 DEG C, such as food, chemical, petroleum, electric power, textile, papermaking, water supply and drainage, gas pipes to regulate the flow and closure of the role of media.

名称:角行程气动执行器 型号:AT系列

Name: angle stroke pneumatic actuator model: AT series

AT/SR气动执行器

AT气动执行器是将输入的气压信号转换成90度,再以扭转矩形形式输出的执行机构。该系列气动执行器是一种外型小、性能高的的执行结构,分为双气控型和单气控型两种,与角行程型控制阀组合可用于调节和开关的场合,也可用于其他回转运动的场合。

AT气动执行器结构特点

1)、挤压成型的铝合金缸体,经硬质氧化处理,表面质地坚硬,耐磨性强。

2)、紧湊的双活塞齿轮、齿条式结构,啮合准确,传动平稳,安装位置对称,输出扭矩恒定。

3)、活塞、齿条和输出轴的活动部位均安装F4导向环,实现低摩擦,长寿命,避免金属间的接触。

4)、缸体、端盖、输出轴、弹簧、紧固件等均经防腐处理。

5)、单气控型执行器的弹簧经预压后安装,可安全、方便的拆卸和组装。

6)、AT气动执行器在全开和全关位置均可进行0度和90度正负5度的双向行程调节。

7)、安装连接尺寸符合ISO5211、DIN3337和VD1/VDE3845以及NUMAR标准,确保AT32气动执行器间的互换性和方便安装电磁阀、限位开关等附件。

8)、输出轴的安装连接孔有多种形状(四方孔、轴键孔、扁孔)供选择

9)、外形美观而精巧,重量轻,具有防水密封结构。

10)、有常温型、高温型、低温型。在常温工作条件下使用丁腈橡胶,在高温或低温时采用氟橡胶或硅橡胶

AT/SR气动执行器

AT/SR pneumatic actuator

AT气动执行器是将输入的气压信号转换成90度,再以扭转矩形形式输出的执行机构。该系列气动执行器是一种外型小、性能高的的执行结构,分为双气控型和单气控型两种,与角行程型控制阀组合可用于调节和开关的场合,也可用于其他回转运动的场合。

The AT pneumatic actuator is an actuator that converts the input air pressure signal to 90 degrees and then is output in a torsional rectangular form. This series of pneumatic actuator is a kind of small size, high performance of the structure, divided into single and double acting type pneumatic type two, can be used to regulate and switch and rotary type control valve combination, can also be used for other rotary motion occasions.

AT气动执行器结构特点

Structural characteristics of AT pneumatic actuator

1)、挤压成型的铝合金缸体,经硬质氧化处理,表面质地坚硬,耐磨性强。

1), extruded aluminum alloy cylinder body, after hard oxidation treatment, the surface texture is hard, and the wear resistance is strong.

2)、紧湊的双活塞齿轮、齿条式结构,啮合准确,传动平稳,安装位置对称,输出扭矩恒定。

2), compact double piston gear, rack type structure, accurate meshing, smooth transmission, symmetrical installation position, and constant output torque.

3)、活塞、齿条和输出轴的活动部位均安装F4导向环,实现低摩擦,长寿命,避免金属间的接触。

3) the F4 guide ring is installed on the active parts of the piston, rack and output shaft to achieve low friction, long life and avoid contact between metals.

4)、缸体、端盖、输出轴、弹簧、紧固件等均经防腐处理。

4) the cylinder body, the end cover, the output shaft, the spring, the fastener and so on are all treated with anticorrosion.

5)、单气控型执行器的弹簧经预压后安装,可安全、方便的拆卸和组装。

5), the spring of the single air controlled actuator is installed after pre pressure, and it can be disassembled and assembled safely and conveniently.

6)、AT气动执行器在全开和全关位置均可进行0度和90度正负5度的双向行程调节。

6), AT pneumatic actuator in the fully open and fully closed position can be 0 degrees and 90 degrees of positive negative 5 degree stroke adjustment.

7)、安装连接尺寸符合ISO5211、DIN3337和VD1/VDE3845以及NUMAR标准,确保AT32气动执行器间的互换性和方便安装电磁阀、限位开关等附件。

7) the size of installation and connection is in line with ISO5211, DIN3337 and VD1/VDE3845, as well as NUMAR standard. It ensures the interchangeability between AT32 pneumatic actuators and the installation of solenoid valves, limit switches and other accessories.

8)、输出轴的安装连接孔有多种形状(四方孔、轴键孔、扁孔)供选择

8), the output shaft mounting and connecting holes of various shapes (square hole, shaft hole, flat hole) for selection

9)、外形美观而精巧,重量轻,具有防水密封结构。

9), the appearance is beautiful and exquisite, the weight is light, it has the waterproof seal structure.

10)、有常温型、高温型、低温型。在常温工作条件下使用丁腈橡胶,在高温或低温时采用氟橡胶或硅橡胶

10), there are normal temperature type, high temperature type and low temperature type. The use of NBR under normal temperature working conditions and the use of fluoro rubber or silicone rubber at high temperature or low temperature

主要外形尺寸

Main shape size

AUB4JKSOXEZC70EHBQEF5UK.png